Peak-system-technik PCAN-DONGLE IPEH-002019 Manual de usuario descargar pdf (Pagina 15)

PCAN-Dongle (ISO) – User Manual

Figure 5: Selection of hardware resources

3. Enter the port address and the interrupt of the used parallel

interface established before (see section above).

4. Confirm your input with OK.

In the dialog box "Connect to CAN hardware" make further settings

(baud rate and CAN message filter) for the created hardware entry.

If you need further help after the program start, use the online help

provided with the program (key [F1]).

4.2 Getting Started under DOS

4.2.1 Information about the Parallel Interface

You need information about the used interrupt and port address of

the parallel interface. It can be determined with the MS-DOS tool

MSD (MSD.EXE in the DOS directory).

The following table gives an overview of the common port

addresses and interrupts for the parallel port at the PC.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Peak-system-technik PCAN-DONGLE IPEH-002019 Manual de usuario Pagina 15